8 inch Schedule 80 Steel Pipe Bollard

Extra Heavy Duty Bollard

The 8 inch Schedule 80 Steel Pipe Bollard is a large diameter, heavy-walled bollard capable of stopping a heavy vehicle at significant speeds. It is a nice size pipe to use in barricades for storefront protection where 6 inch does not seem adequate and you want a thicker wall than the 8 inch Schedule 40. It is also a good choice to protect gas utilities, electrical cabinets and transformers, traffic light cabinets and other crucial utilities. 

Larger Pipes make Better Deterrents

Not only will 8″ pipes protect better than 6″ pipes in an accidental collision, the 8 inch Pipe is more intimidating to would be ram-raiders. This makes the 8 inch pipe more desirable for use as building entrance barricade protection.

Going further, set the pipes into 24″ Diameter, 48″ deep footings, reinforce the pipe interior with 4 sticks of rebar, and reinforce each footing with some rebar hoops, and you have a very staunch bollard. Each bollard including the concrete weighs about 2300 lbs!

Barricade Like a Boss!

 

 

Bollard Boss

The BOSS says…

SAY HELLO TO MY LITTLE FRIEND!

 

All right, look, this pipe is intimidating. I mean you look at this pipe that’s 44 lbs/ft, an 8 footer weighs 350 lbs, set in and filled with concrete… I wouldn’t want to drive into that in anything less than a tank.

 

If this doesn’t deter a ram-raid, they’ll have to learn the hard way.

8″ Schedule 80 Steel Pipe Specifications

Name: 8″ SCH80 Steel Pipe
Nominal Size: 8″
Wall Thickness: 0.5″
Inner Diameter (ID): 7.625″
Outer Diameter (OD): 8.625″ (8 5/8″)
Circumference: 27.10″ (approx 27 3/32″)
Weight: 43.43 lbs/ft
Finishes: Bare Steel, Primed, Galvanized

GET A QUOTE ON BOLLARD PIPES

Answer some questions below on our Bollard Pipe Quote Request Form and you'll get a quote back within a couple days. The shipping destination helps us give you an accurate quote by calculating the freight cost.

We ship pipe nationwide

8 inch Schedule 80 Steel Pipe Bollard

8″ Bollard Covers

1/4 inch Dome Top LDPE

We have a wide selection of 8 inch Bollard Covers that we can bundle with a bollard pipe for a most competitive price.

When gettting a pipe quote, just select “Include Bollard Covers”.

Or just Get a Bollard Covers Quote separately.

Bollard Pipe Quote Requests

Bollard Pipe Quote Requests

Get a quote on Bollard Pipe from Bollard Boss.

If you specify a pipe here, please be sure you haven't selected one in previous field. Otherwise, leave this blank.
A minimum of 4 is required.
Alert: Galvanized does not hold paint worth a darn because it's acts like a non-stick frying pan, so don't choose galvanized if you are hoping to paint pipe. Leave galvanized be, or cover it with a bollard cover, don't paint it!
Structural ASTM A500 Grade A is often typical. Untested and Rejected pipe doesn't necessarily meet fluid pressure tests, but is usually OK for bollard applications that aren't critical.
List variant or ASTM/ASME requirements this pipe must meet.
Include Bollard Covers on Quote?
Bollard Cover type may not be available in certain sizes. We will make our best guess if that's the case.
This field is calculated and can't be directly edited.
This field is calculated and can't be directly edited.
Shipping Destination Type *
Unloading at Shipping Destination *
You must have a way to receive delivery. Trucks don't usually come with a fork and pipe has to be forked from the side of truck. Smaller pipe under 150 lbs can be offloaded by hand, but the driver may not be happy about it. Note: "Forks" is short for forklift, Lull, Track Loader with forks, Skid Steer with forks etc.
Do you want a copy of this quote request?